40 Grafton Cresent
Twenty20 & Co Inc
May 5, 2026
"Designed to tell the real story."
⚠️ Tap Here
⚠️ Property Specs
elements
|
May 5, 2026 |
|
40 Grafton Cresent Calgary, Alberta |
|
Detached |
|
Overcast 3°C |
|
Agent & Client |
|
Lucas Kirsch |
|
Becky Soby Not Applicable bsoby423@gmail.com 4036506605 |
|
Miss Amy |
|
8:24AM Start Time |
method
This inspection is a visual, non-invasive review using normal controls & accessible areas.
We follow a consistent path through all major systems. Findings are structured for clarity so you understand what’s there, what needs attention & what to do next.
Each item lists the component or system, issue defect, recommended action & summary note.
Built to eliminate doubt.
"Turning information into decisions you can trust."
thank you
Thank you for choosing us for your inspection. We truly appreciate your trust.
I will be your primary contact & will do everything I can to ensure you are completely clear on today’s findings.
Please feel free to reach out at any time if you have questions or need further clarification. We’re always happy to help.
Kind Regards,
Lucas Kirsch
stuff.
A property inspection evaluates visible, non-exhaustive conditions & records findings in report form Inspectors examine readily accessible systems & components using a visual, non-invasive method & operate equipment using normal controls when possible. Components, issues, actions, location, trade & summary may be noted. Conditions reflect time of inspection only. Inaccessible or unsafe areas are not inspected (not accessible)
⚠️ We encourage you to read our Standards of Practice (SOP’s), scope, disclamers & limitations. The SOPs outline the scope of the inspection, the systems reviewed & the limitations that apply. They provide the framework inspectors follow to evaluate properties & communicate findings consistently. This structure helps ensure inspections are performed using a clear, proven, nationally recognized standard. Full details by clicking the logo. 🔻🔻🔻
The difference between something good and something great is attention to detail.
legends
 |
It’s a snap! Here are some key terms you’ll see throughout. |
| Iconography | Used for clarity. |
 |
Immediate Attention |
 |
Attention |
| Not Inspected | Limitations. |
| Hand Gestures | Universal. |
| Issue: | Identify the problem if there is one |
| Action: | Recommended path to address the issue |
| L: | Location where it is found |
| T: | Typical Tradesperson |
| R: | Reason why it wasn't inspected |
| $ / $$ / $$$ |
summary
Action: Clean / Repair / Maintain T: ⚫ Roofer L: Throughout
Notes: Attention – Issue(s) should be addressed in a timely manner. Poor drainage could lead to damage or water intrusion.
Action: Further Evaluate / Repair T: ⚫ Roofer
Notes: Attention – Issue(s) should be addressed in a timely manner. Further consequences may occur if not rectified. Potential of water intrusion.
Action: Further Evaluate / Repair L: SEE PHOTO
Notes: Service Recommended – Issue(s) should be addressed by a certified professional. If left as is, this could impact performance and/or reliability. CONSIDER SADDLE FLASHING
Action: Further Evaluate / Repair
Notes: Service Recommended – Issue(s) should be addressed by a certified professional. If left as is, this could impact performance and/or reliability.
Action: Clean / Replace-Maintain L: Front Entry
summary
Action: Correct / Adjust / Verify T: 🟡 Electrical L: Front Yard
Notes: Observation – Issue(s) should be monitored; plan for maintenance or correction as needed. Over time, damage or deterioration could occur.
Action: Seal / Repair / Monitor T: 🟠 Ext-Envelope L: Front and backyard
Notes: Service Recommended – Issue(s) should be addressed by a certified professional. If left as is, this could lead to further deterioration and/or moisture intrusion.
Action: Seal / Repair / Monitor L: Driveway
Notes: Observation – Issue(s) should be monitored; plan for maintenance or correction as needed.
Action: Improve / Re-Grade T: 🟠 Ext-Envelope L: Backyard
Notes: Attention – Issue(s) should be addressed in a timely manner. Poor grading may contribute to moisture or foundation concerns.
Action: Seal / Repair / Monitor L: Multiple Areas
Notes: Service Recommended – Issue(s) should be addressed by a certified professional. If left as is, this could impact performance, safety, and/or reliability. Front, Back & Side Yard
summary
Action: Install &/or Replace T: 🟤 Interior Fin L: Hallway
Notes: Observation – Issue(s) should be monitored; plan for maintenance or correction as needed.
Action: Yearly Monitoring
Notes: Observation – Issue(s) should be monitored; plan for maintenance or correction as needed. Over time, minor wear may gradually worsen.
Reason: Not Accessible: Area or item could not be accessed at the time of inspection and was therefore not evaluated.
Action: Improve- Secure +Insulate L: Upper Hallway
Notes: Service Recommended – Issue(s) should be addressed by a certified professional. If left as is, this could impact performance, efficiency, and/or reliability.
Action: Improve / Secure T: 🟣 Insulation L: Stairwell
Notes: Service Recommended – Issue(s) should be addressed by a certified professional. If left as is, this could impact performance, efficiency, and/or reliability.
summary
Reason: Not Accessible: Area or item could not be accessed at the time of inspection and was therefore not evaluated.
Action: Further Evaluate
Notes: Attention – Issue(s) should be addressed in a timely manner & confirmed next actions.
Action: Monitor
Notes: Observation – Issue(s) should be monitored; plan for correction.
Action: Auger/Sleeve
Notes: Maintenance – Issue(s) should be resolved as part of general upkeep.
summary
Action: Budget for replacement T: 🔵 Plumbing L: Mechroom
Notes: Attention – Issue(s) should be addressed in a timely manner. If left, conditions may worsen & lead to costly repairs.
Action: Further Evaluate T: 🟡 Electrical L: Mech / Laundry
Notes: Service Recommended – Issue(s) should be addressed by a certified professional. If left as is, this could impact performance, safety, and/or reliability.
| R BACK TO SUMMARY |
|
|
|
|
Roof Observations - (1)
Reviewing condition, flashings, drainage flow, debris, & intrusion points. See also Insurance Section.
Roof Observation - (2)
⠀ ⠀
|
|
|
Roof Observation - (4)
⠀ ⠀ ⠀
|
|
|
Soffit(s) & Fascia(s)
Attn. given to ventilation openings, attachment, clearance & visible staining or obstructions.
|
|
Overview Roof / Property
Survey performed to visually document roof coverings & associated components.This includes material condition, install, flashing, penetrations, drainage paths, & anomalies. See also Insurance Section.
|
|
|
Overview Roof (2)
⠀
|
|
|
Overview Roof (3)
⠀
|
|
|
|
|
|
Support Photo
|
|
|
Roofing Materials Lifespan
Provides typical lifespan ranges for roofing materials under average conditions. Actual performance may vary based on climate, installation quality, maintenance & exposure. Values are general guidance only.
|
|
|
|
|
|
Chimney Baseline
Reviewed for presence, material type & overall condition where visible, including rain cap, flashing & draft indicators. Accessible areas are checked for concerns. Inspection is limited to visible conditions without internal evaluation.
|
|
|
Extra Photos
|
|
|
|
|
|
|
|
|
|
|
|
Gram-Shot
We’ve included a couple additional drone shots to provide a broader perspective of the property and its surroundings. These images offer a unique vantage point, showcasing the property’s placement within the neighborhood, nearby features, and the overall landscape.
|
|
|
Gram-Shot ⭐️
❤️
|
|
|
|
|
|
The Roof Baseline O.W.L
𝗥𝗼𝗼𝗳 – 𝗔𝗿𝗲𝗮𝘀 𝗜𝗻𝘀𝗽𝗲𝗰𝘁𝗲𝗱Roof components are reviewed for presence, general condition, visible damage, and basic performance characteristics where applicable. This includes commonly accessible roofing materials, flashings, roof penetrations, drainage features, and visible edges and transitions. The review focuses on observable conditions from accessible vantage points and does not include destructive testing or prediction of remaining service life. |
|
| E BACK TO SUMMARY |
|
|
|
|
Window(s) & Trim-Casing
Reviewed for glazing, condition, cracking, flashing, gaps & sealant deterioration.
|
|
|
Exterior Faucet(s)
Inspected for location, flashings, sealant, operability, anti-siphon & leakage.
|
|
|
HVAC Utility Vent(s)
Inspected for installation, fittings, clearances, penetrations & sealant condition.
|
|
Cladding / Material(s)
Inspected for cracks, gaps, clearance from grade, installation & surface deterioration. See also Insurance Section.
|
|
|
|
|
|
⚠️ SLOPE & Grade Management
Proper grading should slope away from the foundation, not remain flat or create negative slope that directs water toward the property. Watch for heaving, settling, and high or low spots that can trap moisture near walls. Ensure downspouts discharge well away from the structure and that gutters are level and draining correctly. Poor alignment or overflow can erode soil over time, increasing the risk of moisture intrusion and foundation movement.
|
|
|
Drainage System(s)
Inspected for discharge location, flow, secure connections, blockage, slope & conditions directing water away from the structure.
|
|
|
|
|
|
|
|
|
Grading & Drainage Baseline
Inspection of grading, pathways, flatwork, and drainage focused on visible slope, surface condition, and water flow around the structure. Limited to observable conditions at time of inspection.
|
|
|
|
Gas Meter(s) ⠀⠀
Observed for secure mounting, clearance, corrosion, regulator condition & visible gas line connections.
|
|
|
Electrical Service Meter(s)
Observed for presence, secure mounting, cover condition, clearances, conduit connections & visible service wiring concerns.
Electrical Entry.
Observations include service attachment, drip loop, clearance & visible damage or corrosion
|
|
Power Down, Save Up.
To boost energy efficiency, switch to LED lighting and turn off lights when not in use. Use ceiling fans and set thermostats a few degrees higher in summer and lower in winter. Unplug electronics when not in use and choose ENERGY STAR® appliances. Lower your water heater to 120°F and insulate hot water pipes. Keep filters clean and schedule regular maintenance on heating and cooling systems.
|
|
|
|
AC Data Plate(s)
Unit detail(s). See also Insurance Section.
|
|
|
AC Disconnect(s) ⠀⠀
Air Conditioner Unit(s)
Inspected for mounting, clearances, visible condition, line insulation & operational indicators.
|
|
Overview Air Conditioner(s)
Routine AC maintenance includes cleaning the condenser coil, confirming the unit is level and secure, checking refrigerant line insulation, ensuring the disconnect is accessible, and verifying proper airflow at the exterior unit. Filters should be replaced regularly, vegetation kept clear, and unusual noise or vibration monitored to help extend equipment life and maintain efficiency.
|
|
|
|
Deck Material(s)
|
|
|
Overview Deck 2
|
|
The Deck Baseline
Visually inspected structural components including posts, beams, and joists for condition & movement. Looking for ledger attachments & visible flashing at the house connection. Assess decking boards for deterioration or damage, & review guardrails & stairs for stability & general safety.
|
|
|
Retaining Wall(s)
DURAFORM Visually inspected for damage, cracks, leaning, bulging, moisture damage, and wear or compromised integrity.
|
|
|
Retaining Wall Baseline
Retaining Wall(s) – Areas Inspected Components are reviewed for presence, general condition, and visible signs of damage or deterioration where accessible. This includes retaining wall faces, caps, posts or reinforcing elements, drainage provisions, and adjacent grading or surface conditions. Accessible areas are checked for cracking, bulging, leaning, settlement, displacement, moisture staining, or erosion at the wall and surrounding soils. The review is limited to observable conditions without excavation, dismantling components, or evaluating concealed footings, reinforcement, or subsurface drainage systems. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 Rust observed on exterior lights; may reduce lifespan. 3 Repairs noted at upper rear soffit; recommend confirming quality. 4 Wood-to-soil contact at rear deck; risk of decay and pest activity. 5 Newer side window has deteriorated sealant; risk of water intrusion. 6 Basement window well appears to lack a drain and standing moisture noted at grading; drainage concerns present. 7 Efflorescence and prior patch repairs noted at chimney/foundation; indicates past or ongoing moisture movement. 8 Hairline driveway cracks and foundation cracking near garage; typical settlement but monitor. 9 Wear/damage noted at bottom of garage door. 10 Front walkway may be slippery in wet or winter conditions; safety concern. 11 Uneven step heights at rear; trip hazard. 12 Mouse traps observed and exterior storage/playhouse structures present; possible pest activity and items outside inspection scope. |
|
|
The Exterior Baseline
𝗘𝘅𝘁𝗲𝗿𝗶𝗼𝗿 – 𝗔𝗿𝗲𝗮𝘀 𝗜𝗻𝘀𝗽𝗲𝗰𝘁𝗲𝗱Exterior components and finishes are reviewed for presence, general condition, visible damage, and basic operation where applicable. This includes commonly accessible elements such as exterior walls and cladding, doors and windows, trim and sealants, decks, steps, railings, porches, balconies, and visible foundation surfaces. Drainage features, surface grading, and other exterior elements that may affect moisture management and overall performance are also visually reviewed where present. |
|
| G BACK TO SUMMARY |
|
|
|
|
Garage Overhead Door Motor(s)
Review focused on the support mount, basic operation, safety & visible indicators affecting function.
Garage Safety Track Sensor(s)
Observations included sensor presence, alignment, height & response during basic operational testing.
|
|
Garage Overhead Door(s)
Attention given to door panels, tracks, hardware, balance, & general operation. See also Insurance Section.
|
|
|
Garage Heater(s)
Observations directed at operation, support mount, combustable clearances, safety, venting & other common issues.
|
|
|
The Garage Heater Baseline
Garage Heater – 𝗔𝗿𝗲𝗮𝘀 𝗜𝗻𝘀𝗽𝗲𝗰𝘁𝗲𝗱The garage heater was inspected for its presence, general condition, visible damage, and basic performance characteristics where applicable. This included checking the heater’s exterior, controls, ventilation, and any visible connections or wiring. The inspection focused on observable conditions from accessible vantage points and did not include disassembly or prediction of remaining service life. |
|
|
2 Mouse traps were present; may indicate prior or ongoing pest activity 3 Patch repairs and hairline cracking were noted at the foundation and exterior surfaces; consistent with settlement but indicates prior movement 4 An electrical heater is present in the garage. |
|
|
Garage Maintenance.
Learning how to maintain a residential garage door is key to operating it efficiently. A malfunction can prevent you from taking your car out of the garage when you want to. Regular maintenance twice a year can make such mishaps less likely. INFO: Visually inspect the door, perform safety tests, examine hardware for defects, service the chain or belt, service seals & springs, clean the garage door surface, replace batteries & bulbs, & Reduce friction between the door & the stop. Adjust the opening & closing speed.
|
|
|
The Garage Baseline
Components are reviewed for presence, general condition, and visible signs of damage or deterioration where accessible. This includes wall and ceiling finishes, visible framing, overhead door assemblies, fire separation elements, service doors, and accessible electrical components. Accessible areas are checked for moisture damage, staining, cracks, corrosion, pest activity, and improper storage or clearance to combustibles. The review is limited to observable conditions without operating door openers, moving stored items, or evaluating concealed structural, electrical, or fire-resistance assemblies.
|
|
| A BACK TO SUMMARY |
|
|
|
|
The Hatch (Scuttle) Entry
Visually inspected for insulation & signs of damage, gaps, or air leakage at the opening.
|
|
|
|
|
Insulation - Depth
Observations included insulation depth, vapour barrier presence, coverage consistency, & visible gaps. See also Insurance Section.
|
|
|
2 Loose and displaced insulation was noted at the rear of the attic; may reduce effectiveness 3 Random pieces of polystyrene were observed; may indicate prior work or debris left in place 4 Attic hatch weatherstripping lacks insulation backing; this may allow heat loss and air leakage |
|
|
Extra Photos
|
|
|
Lower Attic Hatch
|
|
|
Inside Lower Hatch Space
Visually inspected / for your records
|
|
|
2nd Attic Hatch Stairwell
Not Accessible: Area or item could not be accessed at the time of inspection and was therefore not evaluated.. Not Inspected
|
|
|
The Crown’
The roof structure of a home is composed of several critical elements. Rafters and trusses, made from wood or metal, form the skeleton of the roof, supporting the outer layers and shaping the roof’s slope and style. Sheathing, typically plywood or OSB, is attached to the rafters/trusses, providing a base for roofing materials. Underlayment, a water-resistant layer, is placed over the sheathing for added protection against moisture. The roof covering, which can be shingles, tiles, metal, or other materials, serves as the outermost barrier against weather elements. Flashing is used around vents, chimneys, and valleys to prevent leaks, and gutters are installed to channel water away from the structure.
|
|
|
The Attic Baseline
Components are reviewed for presence, general condition, and visible signs of damage or deterioration where accessible. This includes visible roof framing, sheathing, insulation, ventilation components, attic access, and observable wiring or mechanical penetrations. Accessible areas are checked for moisture staining, microbial growth, pest activity, displaced or compressed insulation, and improper ventilation. The review is limited to observable conditions without moving insulation, dismantling components, or evaluating concealed framing, wiring, or roof coverings.
|
|
| I BACK TO SUMMARY |
|
|
|
|
Outlet(s)
Inspected for operation, secure mounting, polarity, grounding, cover condition & visible wiring concerns.
Interior Light(s)
Inspected for operation using normal switching procedures & visible deficiencies.
|
|
|
Interior Door(s) ⠀
Attention given to alignment, operation, hardware, hinges, latching, & indicators affecting use.
Door Hinge.
|
|
|
Interior Window(s) ⠀
Observations included glazing, operation, seals, & conditions affecting performance.
Window(s) & Operation
Review for opening, closing, latching, seals, weep holes & screens. See also Insurance Section.
|
|
General Ceilings / Walls
Visually examined for common defects.
|
|
|
|
|
|
About Humidity’
Maintaining proper indoor relative humidity in winter is crucial to health and comfort. Cold air holds less moisture, leading to dry indoor air when heated. Optimal indoor humidity (30-50%) prevents respiratory issues, dry skin, and damage to wood furnishings. Balancing it with outdoor temperature prevents condensation on windows and mold growth, ensuring a healthy and comfortable living environment.
|
|
|
Fireplace(s)
Review focused on fuel type, structure, visible chimney/venting, flue, firebox, damper operation, and potential safety hazards.
|
|
|
The Fireplace Baseline
Components are reviewed for presence, general condition, and visible signs of damage or deterioration where accessible. This includes the fuel type, firebox, hearth, mantel, damper, and visible portions of the chimney and flue. Accessible areas are checked for soot accumulation, creosote buildup, cracks, or moisture intrusion. The review is limited to observable conditions without dismantling components or conducting internal chimney inspections.
|
|
|
|
Focus Feature Page
These are photos related to the same component or system.
Smoke - CO Detector(s).
Visually inspected for presence, placement, condition & power source. See also Insurance Section.
|
|
|
Carbon Monoxide Test(s)
Used to detect colorless, Odourless, & tasteless flammable gas. Spot checks performed in high-risk areas.
Moisture Meter Instrument
Used to measure the % of water in a given product. X10 Spot checks performed.
|
|
Safety First
Smoke and carbon monoxide alarms are essential life safety devices. Install smoke alarms in bedrooms, outside sleeping areas, and on every level. Install CO monitors outside sleeping areas and on each level near fuel burning appliances and attached garages.Test monthly. Replace batteries yearly. Replace units every 7 to 10 years.Keep fire extinguishers accessible in the kitchen, garage, and near mechanical equipment.
|
|
|
On the way out
All items tested & operated during this inspection were returned to their prior settings & positions. Windows, doors, locks, switches, and appliances are restored to their original condition, and reasonable efforts are made to tidy and leave the home as it was found at the time of inspection.
|
|
|
Stats set back
|
|
|
Stove / Oven Off
|
|
|
Dishwasher Off / Open
|
|
|
2 Ceiling staining noted, including brown marks at the dining room archway; may be scuffing or past moisture 3 Fireplace appears converted to natural gas; exterior suggests previous wood-burning use 4 Minor dings and knocks observed on interior walls; typical wear 5 Egress window observed in lower living space; size and compliance not confirmed 6 Two kitchen switches have unknown functions 7 Strike plate under sink cabinet is loose |
|
|
Extra Photos
|
|
|
|
|
|
|
|
|
|
|
|
The Interior Baseline
𝗜𝗻𝘁𝗲𝗿𝗶𝗼𝗿 – 𝗔𝗿𝗲𝗮𝘀 𝗜𝗻𝘀𝗽𝗲𝗰𝘁𝗲𝗱Interior components and finishes are reviewed for presence, general condition, visible damage, and basic operation where applicable. This includes commonly accessible areas and systems such as entry spaces, walls, ceilings, floors, trim, doors, windows, stairs, electrical components, lighting, life safety devices, heating and cooling distribution elements, and other visible interior features typically found within the living space of the home. |
|
|
|
Thermal Heat Supply
|
|
|
Thermal Ceilings
Thermal Wall(s)
|
|
|
Thermal Window(s)
Thermal Door(s)
|
|
|
Hot Water Thermal
Thermal P-Trap(s)
|
|
|
Additional Toilet
Tub Drains
|
|
|
Showerheads
Tub filler
|
|
Fireplace
|
|
|
Thermal Dryer(s)
|
|
|
Thermal Toilet(s)
|
|
|
|
Additional windows
Additional Doors
|
|
|
All Infloor
Basement Windows
|
|
|
|
|
|
Stove
Oven
|
|
|
Main Waterline
Main Panel
|
|
|
Main Tank
Main Furnace
|
|
The Thermal Baseline
Observervations of surface temperature variations that may indicate areas of heat loss, moisture intrusion, or abnormal electrical or mechanical conditions where accessible. The review is limited to visible thermal patterns on exposed surfaces and does not determine the exact cause of temperature differences. Findings are influenced by environmental conditions, building materials, and time of day. This review does not include destructive testing, internal wall inspections, or verification of concealed components, and is limited to observable conditions at the time of inspection.
|
|
|
Routine Maintenance Pays
This video is provided as a helpful reference to support everyday home care & maintenance. It highlights simple steps that can reduce common problems & may help avoid unnecessary repairs or expenses over time. Watching this video may make it easier to understand the small actions that help keep a home running smoothly.
|
|
| K BACK TO SUMMARY |
|
|
|
|
Kitchen Outlet(s)
Inspected for secure mounting, GFCI protection, polarity, grounding, cover condition & visible wiring concerns affecting safe use.
|
|
|
Refrigerator(s)
Inspected for operation, temperature control, door seal condition, water line connections, drainage, and general installation.
|
|
|
Stovetop(s) / Cooktop(s)
Inspected for basic operation, burner function, surface condition & safety concerns.
|
|
Hood Fan(s) / OTR
Attention was given to general operation, connections, & ventilation path where visible.
|
|
|
Kitchen Faucet(s), Sink(s) & Drain(s)
Reviewed, focused on operation, temperature, mounting, drainage, odors & leakage indicators.
|
|
|
Kitchen P-Trap(s)
Checked for drainage, trap configuration, connection security, leakage indicators & visible corrosion.
|
|
|
Kitchen Over-all
A record of what was seen this day
|
|
|
Support Photo
|
|
|
Extra Photos
Counters and cabinetry
|
|
|
|
|
|
|
|
|
|
|
|
2 Hood fan is dirty with missing insulation 3 Cabinets are uneven with slight warping 4 Countertops show minor stains and dings 5 Grout deterioration noted at kitchen finishes 6 Evidence of past condensation at kitchen window |
|
|
The Kitchen Baseline
Components are reviewed for presence, general condition, and visible signs of damage or deterioration where accessible. This includes cabinetry, countertops, sinks, faucets, visible plumbing connections, built-in appliances, wall and ceiling finishes, and accessible electrical outlets. Accessible areas are checked for leaks, staining, loose or damaged finishes, improper clearances, and signs of moisture intrusion. The review is limited to observable conditions without moving appliances, dismantling components, or evaluating concealed plumbing, electrical, or ventilation systems.
|
|
|
The Laundry Baseline
Components are reviewed for presence, general condition, and visible signs of damage or deterioration where accessible. This includes cabinetry, countertops, sinks, faucets, built-in appliances, visible plumbing connections, wall and ceiling finishes, and accessible electrical receptacles. Accessible areas are checked for leaks, staining, loose or damaged finishes, improper clearances, and signs of moisture intrusion. The review is limited to observable conditions without moving appliances, dismantling components, or evaluating concealed plumbing, electrical, or ventilation systems.
|
|
| L BACK TO SUMMARY |
|
|
|
|
Laundry Washer Machine
Reviewed, focused on plumbing connections, hoses, drains, seals & visible leakage.
Inside The Washer
sellers belongings in washer. Not Accessible: Area or item could not be accessed at the time of inspection and was therefore not evaluated.. Not Inspected
|
|
|
Laundry Dryer(s).
Attention given to operation, temperature variance, vent connections & lint accumulation.
Inside The Dryer
|
|
|
VENT - VENT - VENT
Door & drawer OPEN to let moisture escape & prevent organic growth.
RISK Reduction
Check behind the washer for leaks regularly, and shut off the water when away on vacation.
|
|
2 Water supply lines were observed to move when activated; this is consistent with water hammer and may benefit from securing and/or mitigation 3 Water lines are in close proximity to mechanical components and lack insulation; this may increase risk of wear, noise, or freezing in colder conditions |
|
| B BACK TO SUMMARY |
|
Report Legend
Explains reports symbols.
|
|
|
Bathroom Outlet(s)
Tested for anomalies.
Bathroom Extraction Fan(s)
Observations included basic operation & airflow response using simple draw testing.
|
|
|
Overview Shower / Bathtub
Focused on fixtures, connections, operation, overflows & surrounds.
Plumbing Floor Drain(s)
Observations included drainage flow, blockage signs, backups, odors & leakage indicators.
|
|
|
Bathroom Water Faucet(s)
Operated to assess function, flow, mounting, sealing & signs of leakage, corrosion, or wear.
Bathroom Sink Drain(s)
|
|
Bathroom P-Trap(s)
Checked for drainage, trap configuration, connection security, leakage indicators & visible corrosion.
|
|
|
Toilet(s)
Reviewed for stability, operation & visible leakage. X3 flush test per unit.
|
|
|
|
|
|
General Flooring
Visually examined for common defects.
|
|
|
Bathtub & Surround(s)
Inspected for condition, secure installation, functional drainage, faucet operation, and visible signs of leaks, cracks, damage, or deteriorated sealant at accessible areas.
|
|
|
⚠️ Bathroom General Notes
1 In-floor heating system present with dedicate thermostat; appeared installed at time of inspection2 Spots were observed on the ceiling; may indicate past moisture activity and should be monitored 3 Maintain caulking and sealant at wet areas to help prevent moisture intrusion 4 Ensure exhaust fan is used during and after bathing to reduce humidity buildup 5 Regularly inspect plumbing fixtures and connections for leaks or signs of wear |
|
|
Bathroom Ventilation
Bathroom exhaust fans help remove excess moisture created during bathing and showering. Running the fan during use and for at least 15–20 minutes afterward helps reduce humidity, which can prevent condensation, microbial growth, peeling finishes, and moisture damage to walls, ceilings, and nearby materials. Regular use and periodic cleaning of the fan grille improve performance and indoor air quality.
|
|
|
The Bathroom Baseline
Components are reviewed for presence, general condition, and visible signs of damage or deterioration where accessible. This includes cabinetry, countertops, sinks, faucets, visible plumbing, appliances, wall and ceiling finishes, and electrical receptacles. Accessible areas are checked for leaks, staining, loose or damaged finishes, improper clearances, and signs of moisture intrusion. The review is limited to observable conditions without moving appliances, dismantling components, or evaluating concealed plumbing, electrical, or ventilation systems.
|
|
|
|
Focus Feature Page
These are photos related to the same component or system.
More
TerraBurst (Sewer/Water Specialist) Contact Information: tel:+15873159750 Email: info@terraburst.ca
|
|
Sewer Line Access Location
A floor drain was selected for access. Spider webs blocking access, they were cleared for access.
|
|
|
Sewer Line Material & Notes
Suspected materials seen within the sewer line included: ABS (acrylonitrile butadiene styrene), cast iron, concrete & liner/sleeve. It is recommended to have scope inspections performed & compared to today’s footage on a regular basis.
|
|
|
Sewer Line Access Location After
The access area was cleaned and sanitized after the operation. Another tidy job :)
|
|
|
|
|
|
|
|
|
|
|
|
Findings @: 54 feet
Material change to liner/sleeve.
|
|
|
|
|
|
Sewer Scope Video
This video is provided as a visual reference of the sewer scope performed at the time of inspection. It simply shows the camera moving through the line and the general condition observed during the scan. Watching this video may help provide additional context to the written findings and images included in this report.
|
|
| M BACK TO SUMMARY |
|
|
|
|
The Main AMP
Generally, this will shut down everything! Designed to interrupt a large amperage load.
|
|
|
Hot Water Data
Unit detail(s). See also Insurance Section.
|
|
|
The Main Heating Unit(s)
Observations included mounts, venting, ducts, filters, clearances & visible performance.
Heating Unit Data Plate
Unit detail(s). See also Insurance Section.
|
|
|
Heating Unit Shutoff ⠀⠀⠀
Observed for accessibility, labeling, secure mounting & operation affecting emergency shutoff capability.
Water Main Shutoff ⠀
Assessing valve operation & signs of leakage, corrosion, or damage. See also Insurance Section.
|
|
|
Plumbing Waterlines
Inspected for support, connections, leaks & visible corrosion or damage. See also Insurance Section.
Ext. Water Shutoff(s)
Observed for accessibility, labels, valve operation, connection condition & leakage indicators. Not Accessible: Area or item could not be accessed at the time of inspection and was therefore not evaluated.. Not Inspected
|
|
Maintenance Advisory
Mechanical systems require routine homeowner maintenance and periodic observation for safe operation. This includes replacing heating system filters as recommended, keeping drains and condensate lines clear of debris, and periodically having sewer lines evaluated by a qualified contractor. Safety measures include maintaining domestic hot water at a safe temperature and installing locking or spring-loaded cover plates on critical controls to prevent accidental shutoff. Occupants should be familiar with all system shutoffs and label them clearly. Mechanical rooms should not be used for storage due to required clearance to combustibles. Homeowners should periodically check the mechanical room for calcification, minor leaks, corrosion, or unusual odors that may indicate developing issues.
|
|
|
|
|
|
|
Rim Joist Example
The outer board capping floor joists. Inspected for damage, moisture, air leaks, insulation presence, and pest activity.
|
|
|
Frost Wall Example
A foundation wall below grade. Inspected for cracks, moisture intrusion, movement, and insulation/air sealing issues.
|
|
|
Joist
These serve to provide stiffness to the subfloor sheathing & spread the load.
Beam
The structural element that primarily resists loads applied laterally.
|
|
Stair(s) & Railing(s)
Attention was given to structure, rise/run consistency, landings, string if visible, handrails, & visible safety indicators.
|
|
|
Stairs & Railings Baseline
Stairs & Railings – Areas Inspected Inspection of the stairs focused on accessible structural and safety conditions. This included treads, risers, stringers, landings, handrails, and guards where present. Components were reviewed for secure attachment, uniformity, damage, wear, and trip or fall hazards. The evaluation was limited to visible and accessible areas without dismantling components or assessing concealed structural elements. |
|
|
General Ceilings / Walls
Visually examined for common defects.
|
|
|
General Flooring
Visually examined for common defects.
|
|
|
Framing 101
Behind every wall is a framework — much like your own skeleton. Vertical studs form the bones, while cripples support around openings. King and jack studs work together to hold up headers over doors and windows, spreading the load. Top plates cap the walls and tie everything together, while bottom plates anchor it all to the floor. This unseen structure is critical to the strength, stability, and alignment of your home. Just like a healthy body depends on solid bones, your home depends on this framing to stand true. ⠀⠀⠀⠀⠀ ⠀ ⚠️ See also Insurance section for more details on your the structural specifications of this property.
|
|
|
⚠️ Mechanical General Notes
1. Heating: Schedule regular cleaning and professional precision tune-ups for ALL heating equipment.
8. Note Scope: Low-voltage systems are not inspected due to SOP limitations and wide performance variances.
9 Uninsulated water lines in mechanical room may be at risk of freezing; recommend insulation10 GFCI outlets present, previously indicating open grounds now corrected 11 Shut off valves are unlabelled; recommend identification for clarity 12 Staining and variation noted at joists and subfloor, consistent with typical aging 13 Minor penetrations at ducting observed; recommend sealing with tin tape |
|
|
The Mechanical Baseline
𝗠𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 – 𝗔𝗿𝗲𝗮𝘀 𝗜𝗻𝘀𝗽𝗲𝗰𝘁𝗲𝗱Mechanical components and systems are reviewed for presence, general condition, visible damage, and basic operation where applicable. This includes commonly accessible heating, cooling, and ventilation equipment, water heating equipment, visible piping and ductwork, pumps, valves, and associated controls. Supporting components and other mechanical features typically found within the home are also visually reviewed where present. 𝗦𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲 – 𝗔𝗿𝗲𝗮𝘀 𝗜𝗻𝘀𝗽𝗲𝗰𝘁𝗲𝗱 Structural components are reviewed for presence, general condition, and visible signs of damage or movement where applicable. This includes commonly accessible foundation surfaces, framing elements, beams, posts, columns, load-bearing walls, and other visible structural features. The review focuses on observable conditions within accessible areas and does not include engineering analysis or invasive evaluation. |
|
insurance
| Safety Overview | |
| Site Limitations | ⚠️ Visibility - Access - Height |
| Inspection Type | ◻️ Pre-Purchase Inspection (non-exhaustive) |
| Property Vacancy | ◻️ Occupied & Furnished (restrictive) |
| Smoke & CO | ⚠️ Not Verified: Unable to confirm function |
| Egress Windows | ⚠️ Location: Bedroom(s): Partially Present |
| Stairs & Handholds | ◻️ Structure: Functioning as Intended |
| Roof System | |
| Method of Inspection | ◻️ Ladder at edge, walked & drone |
| Roofing Surface | ◻️ Material: Metal - Age: Unknown |
| Drainage Path | ◻️ System: Trough & Downspouts |
| Ventilation System | ◻️ Box Vent(s) - Soffit |
| Exterior Overview | |
| Cooling Type(s) | ⚠️ Location: Backyard - Temp: Not Tested |
| Main Fuel Shutoff | ◻️ Location: Front Yard |
| Envelope Cladding | ◻️ Material: Vinyl & Brick |
| Steps & Guards | ◻️ Materials: Concrete Stairs & Metal Railing |
| Barriers & Walls | ◻️ Material: Concrete (retainment) |
| Grade & Ground Cover | ◻️ Terrain: Flat & Level - Vegitation |
| Hardscape Surfaces | ◻️ Material: Paths: Concrete - Drive: Concrete |
| Garage Systems | |
| Fire Seperation | ⚠️ Minor Gaps: Small openings noted |
| Safety Auto Reverse | ◻️ Status: Functioning as intended |
| Heating Equipment | ◻️ Unit: NG Furance - Age:80’s? Undetermined |
| Attic System | |
| Hatch & Insulation | ◻️ Location: Hallway X2 - Mat: Blown-In |
| Sheathing & Poly | ◻️ Material: Ply - Vap Barrier: Present (ltd vis) |
insurance
| Interior Overview | |
| Thermostat Location | ◻️ Location: Main Level - Restored to original |
| Walls & Ceilings | ◻️ Material: Drywall |
| Flooring Surfaces | ◻️ Material: Hardwood - Tile |
| Other Features | ◻️ Type: NG Fireplace (INSERT) |
| Kitchen & Bathroom | |
| Safety - GFCI’s | ◻️ Location: Kitchen: Present - Bath: Present |
| Ventilation System | ◻️ Type: Range Hood: to EXT. - B-Fan: Present |
| Laundry Specs | ◻️ 220V - Vent: Metal - Water: Braided |
| Mechanical System | |
| Heating Unit(s) | ◻️ Type: HE Furnace / Forced Air - Age:#### |
| Heating Fuel Source | ◻️ Type: Natural Gas - Primary |
| Water Heater Unit | ◻️ Type: ~40 gal Tank - Age:2014 |
| Water Heating Fuel | ◻️ Type: Natural Gas - Primary |
| Plumbing System | ◻️ Public Water: CopperPEX - City Sewer: CAST |
| Water Main Shutoff | ◻️ Location: Mechanical Room |
| Back Flow Valve | ⚠️ Installation: Unknown |
| Electrical Service | ⚠️ Entry: Overhead - Material: Unknown |
| Service Disconnect | ◻️ Location: Not Present |
| Main Panel Interior | ◻️ Location: Mech Room - Ground: Unknown |
| Electrical System | ◻️ Service: 100 AMP - Branch: Copper |
| Structure System | |
| Roof Structure | ◻️ Type: Rafter Framing |
| Exterior Wall System | ◻️ Type: Wood Studs |
| Structure System | ◻️ Type: Dimensional Wood Frame |
| Foundation System | ◻️ Type: Poured Concrete |
| Structural Observ. | ◻️ Notes: Minor settlement |
playbook
You’ll find tips & tricks on maintenance, recalls, cleaning, preparing your property for sale, dealing with difficult neighbours & more.
🔻press the thumb print.🔻
72 seconds
Positive reviews from awesome customers like you help others to feel confident about choosing our firm & our “to the point” reporting methodology.
We’d so appreciate if you could take 72 seconds to click on our logo below and share your happy experience.
Much Appreciated
agreement
Twenty20 & Co Inc
2017 27 Avenue SW
Calgary, Alberta
4038365528
www.2020mhi.com
Business License #349599
Inspection Date
May 5, 2026 at 8:24am MDT
Inspection Address
40 Grafton Cresent
Calgary, Alberta
This Agreement is Between
Becky Soby as ("Client") and Twenty20 & Co Inc as ("Company")
Sample Contract Disclaimer
This document is provided as a sample template only. It is intended to customized and reviewed by the user for their specific jurisditcion and needs. Before using this contract, you must remove this disclaimer and ensure all terms are accurate and legally compliant in your area. Inspectagram assumes no liability for the use of this sample, and users are strongly advised to consulat with there legal counsel to finalize the contract.
0. Universal Services Agreement
This Agreement sets out the terms and conditions that apply to those inspection services that may be offered by the Inspector or Company, including but not limited to home inspections, commercial inspections, mold assessments, sewer scopes, pool and spa inspections, air quality assessments, thermal imaging, pest evaluations, and any other present or future inspection service (“Inspection Services”). Only the specific Inspection Service(s) expressly identified in the written Report as selected and performed on the Inspection Date, by inclusion of a corresponding chapter in the Report (the “Chapter”), are included within the scope of this Agreement. All Inspection Services not expressly identified as selected and performed are expressly excluded and shall not be interpreted as included, implied, or promised. All Inspection Services performed are strictly visual and non-invasive in nature, limited to what is readily accessible at the time of the visit, and subject to the limitations, exclusions, disclaimers, and liability restrictions set forth in this Agreement.
1. Preamble
Subject to the terms and conditions of this service contract (the “Service Contract”), dated as of the date signed by the Client, the Client wishes to engage the Company and the Inspector, and the Company and the Inspector agree to perform the specific Inspection Service(s) at the property address provided above (the “Dwelling”) on the date and time noted above (“Inspection Date”), in consideration of the payments, covenants, and agreements set out herein. For specialty inspections (such as mold, radon, sewer scope, air quality or other single-service assessments), the term “Dwelling” refers only to the specific area(s), component(s), or system(s) associated with the selected Inspection Service.
agreement
2. Purpose / Scope
The purpose of the Inspection is to take reasonable efforts to endeavour to detect the presence of defects or material issues in connection with the specific Inspection Service(s) performed. The Inspection consists of a visual, non-invasive assessment of readily accessible components, followed by a same-day written Report (or within one business day) identifying high-level findings and material defects observed and deemed significant by the Inspector (the “Report”). The Inspector shall inspect and report on systems and components in accordance with applicable Standards of Practice, (INSERT WHICH SOPS AND URL WEBSITE LINK), which are incorporated by reference into this Agreement. Client acknowledges that they have had the opportunity to review the referenced Standards of Practice at the above URL. The inspection is designed to identify observed material defects. The Inspector shall inspect and report on systems and components in accordance with applicable Standards of Practice. The Chapers within the Report correspond to building systems, including roofing, structure, exterior, interior, plumbing, electrical, and mechanical systems. The scope of the Inspection is limited to a visual, non-invasive inspection of the readily accessible components relevant to the actual Inspection Service(s) performed on the date and time of the Inspection. The inspection is performed in accordance with applicable Standards of Practice, unless superseded by governing laws or regulations. The applicable Standards of Practice are linked to the Disclaimers page in the Reportl. The Inspection excludes latent defects that cannot reasonably be detected during a one-day visit aimed at producing a same-day report. The Inspection is not a building code, title, regulatory, zoning, or by-law compliance inspection. As a courtesy only, the Inspector may note conditions, observations, or provide commentary outside the selected Inspection Service(s); however such comments are informational only and are not part of the Inspection. For clarity, the scope of the Inspection is determined solely by the Report Chapter(s) expressly identified as selected and performed. Narrative references, observations, comments, photographs, measurements, incidental findings, generalized statements, or descriptive information contained anywhere in the Report shall not be construed as the performance, offer, inclusion, or completion of any Inspection Service unless that Inspection Service is expressly identified as selected and performed through a corresponding Report Chapter. In the event of any inconsistency between narrative content and the Inspection Service Chapters, the Inspection Service Chapters shall control.
3. Client Responsibilities / Exclusivity
It is the responsibility of the Client to obtain from the Dwelling owner a disclosure of any known defects on or before the Inspection Date. The Report is intended for the exclusive use and benefit of the Client. The Client agrees to give the Inspector permission to discuss observations with real estate agents or other interested parties, and INSPECTOR AND COMPANY (AND THEIR SUPPLIERS) ACCEPT NO RESPONSIBILITY FOR USE BY THIRD PARTIES, and IF THE REPORT IS PROVIDED TO ANY THIRD PARTY BY YOU OR ANY PERSON ACTING ON YOUR BEHALF, YOU RELEASE THE INSPECTOR AND COMPANY (AND THEIR SUPPLIERS) FROM ANY LIABILITY AND AGREE TO PAY ANY ASSOCIATED COSTS.
agreement
4. Assignment / Litigation
This Agreement is not transferable or assignable by the Client. Any dispute, claim, or litigation arising out of or relating to this Agreement shall be brought exclusively in a court of competent jurisdiction located in the region where the Inspection was performed unless otherwise required by local law, and if the Inspector and/or Company is the substantially prevailing party in any such litigation, the Client shall pay all costs, expenses, and legal fees of the Inspector and Company in defending such claims.
5. Excluded / Included
The Inspection will NOT address environmental concerns including, but not limited to air quality, water quality or quantity, sealed or underground fuel storage tanks, asbestos, radon gas, molds, toxins, lead paint, or soil contamination. The Inspection will also NOT address infestation by wood-boring insects, rodents, or other vermin. The Client acknowledges that specialists may be needed to identify or evaluate these risks. This Inspection contract does not include outbuildings or structures not attached to the Dwelling other than a garage or carport. For clarity, if the Inspection Service selected and expressly identified by Report Chapter is mold, radon, air-quality, pest or other specialty-related, this exclusion does not apply solely to the specific service performed. References to excluded items within the Report that appear outside a corresponding Inspection Service Chapter are provided for informational purposes only and do not alter the scope of the Inspection. The Inspection will include the following components of the Dwelling unless access is limited, weather interferes, or other conditions prevent it: Roofing, Flashings / Chimney, Exterior (grading, walkways, driveways, retaining walls, patios, decks), Structure, Electrical, Heating & Cooling Systems (external, visual assessment only), Insulation, Plumbing, Interior. For specialty inspections (mold, radon, sewer scope, air quality, thermal imaging, or any single-service inspection), the above list does not apply unless directly related to the specific Inspection Service expressly identified by Report Chapter.
6. Release / Disclaimer of Warranty
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE CLIENT HEREBY RELEASES AND WAIVES ANY CLAIM IT MAY HAVE AGAINST THE INSPECTOR OR COMPANY (AND THEIR SUPPLIERS) FOR DEFECTS, ISSUES, OR CONDITIONS THAT MAY NOT REASONABLY BE DETERMINED DURING A VISUAL INSPECTION OF READILY ACCESSIBLE COMPONENTS, AND THE CLIENT ACKNOWLEDGES THAT THE INSPECTION AND REPORT ARE NOT A GUARANTEE, WARRANTY, OR INSURANCE POLICY OF ANY KIND, AND ARE PROVIDED “AS IS” WITHOUT ANY REPRESENTATION, WARRANTY, OR CONDITION, EXPRESS OR IMPLIED, INCLUDING ACCURACY, AVAILABILITY, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, AND NEITHER THE INSPECTOR NOR THE COMPANY (NOR THEIR SUPPLIERS) WARRANT THAT THE INSPECTION OR REPORT WILL MEET THE CLIENT’S REQUIREMENTS OR BE ERROR-FREE.
7. Limitation of Liability
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, (I) The Inspector and Company (and their suppliers) shall not be liable for any consequential, exemplary, special, or incidental damages or loss of use of the Dwelling, and (II) Total liability shall be limited to direct and provable damages and shall not exceed the fee paid by the Client for the Inspection.
agreement
8. Entire Agreement
This Agreement represents the entire agreement between the parties, and no statement or promise made by the Company or its officers, agents, contractors, or employees shall be binding unless set forth herein.
9. Payment / Report Delivery
Payment of the inspection fee is due upon completion of the Inspection, and the Client agrees to pay all legal and time expenses incurred in collecting overdue payments, including attorney’s fees if applicable. Unless otherwise agreed, the Report will be delivered to the Client on the same day or within one business day of the Inspection Date.
10. Severance and Enforceability
If any provision of this Agreement is found invalid or unenforceable, it shall be deemed severed, and the remainder of the Agreement shall continue in full force and effect.
11. Local Requirements ( Mandatory )
Inspectors may paste the following prompt into an AI tool to identify mandatory local requirements: “I am a home inspector preparing a contract for [your province or state], can you provide any mandatory language, disclosures, or required contract elements under local regulations, and please specify any sections requiring Client initials.”
12. Authorization
If more than one Client signs, the signatory represents that they are authorized to sign on behalf of all Clients, and if the Client is a corporation or similar entity, the signatory personally guarantees payment.
13. Software Disclaimer
The Client acknowledges that the Inspector and/or Company may use software, applications, templates, or digital tools provided by third-party vendors in connection with performing the Inspection and preparing the Report, and the Client agrees that such third parties are not a party to this Agreement, and such third parties have no liability for any loss, claim, or damage arising from the Inspection, Report, or the Inspector’s use of their software, and all responsibility for the Inspection and Report remain solely with the Inspector and Company under this Agreement and the Report. The Client acknowledges that software is an administrative aid only and does not alter the visual, non-invasive nature or limitations of the Inspection.
Lucas Kirsch
Lic#:334028
Becky Soby
Signed May 5, 2026 at 11:25am MDT